Introducción
Can an LED display be installed next to the swimming pool? This sounds a bit “risky”; after all, the humid environment is not conducive to electronic devices.
However, with the advancement of technology, today’s Pantalla LED has strong waterproof, moisture-proof, and rust-proof capabilities, and can even operate stably in extreme environments.
So, how do you install a practical and safe LED display next to the swimming pool?
Tabla de contenido
1. Feasibility analysis of installing an LED display next to the swimming pool
Installing an LED display next to the swimming pool is actually quite good, but you have to consider some things clearly.
First of all, the humidity is high, there is a lot of water vapor, and there may be chlorine, which is not very friendly to electronic equipment and is prone to problems.
Therefore, you have to choose a waterproof, moisture-proof, and rust-proof display, preferably IP68 level.
This kind of display has super waterproof performance and can be completely dustproof and waterproof.
Even if it is soaked in water for a long time, it is no problem. It is especially suitable for the swimming pool environment.
When installing, the location is also critical. It cannot affect everyone’s swimming, resting, or walking, and it must be installed firmly. Otherwise, it will be dangerous if it falls.
In addition, the brillo and angle of the display screen must be adjusted properly.
Otherwise, the reflected light will dazzle people’s eyes, which will not only make people uncomfortable but also affect the lifeguard’s observation of the swimming pool, which will be troublesome.
From a practical point of view, LED display screens can do a lot of things.
For example, it can display the opening hours and fees of the swimming pool, play swimming teaching videos, and even put advertisements to help the swimming pool make more money.
These functions can enhance everyone’s experience and make the swimming pool more attractive.
In general, as long as you choose the right display screen and pay attention to the installation location and maintenance, it is definitely a good idea to install an LED display screen by the swimming pool. It is both practical and beautiful.
2. Types of LED display screens suitable for swimming pool environments
1). High waterproof grade display screen (IP65 and above)
1.1). Waterproof and moisture-proof:
There is a lot of water vapor by the swimming pool, and water will splash from time to time. IP65 and above display screens have good waterproof performance.
Like IP68, it is no problem to soak it directly in water. It is not afraid of water splashing or moisture when placed by the swimming pool, and it can be used for a long time.
1.2). Dustproof and rustproof, more durable:
There is chlorine in the swimming pool water, and there are corrosive substances in the air.
This high-waterproof display has strong dustproof and rustproof capabilities, will not be damaged by these corrosive substances, and has a long service life.
1.3). Safe and reliable:
The waterproof and dustproof design reduces the risk of short circuit and leakage, making it safer to use, and there is no need to worry about accidents due to moisture or water ingress.
2). Outdoor dedicated LED display
2.1). High brillo, clear view:
The direct sunlight on the side of the swimming pool may not be clear for ordinary displays.
The outdoor dedicated LED display has high brightness and can clearly display the content even in the sun, without worrying about reflection or unclear view.
2.2). Sun-resistant and frost-resistant, strong adaptability:
This display is designed for outdoor use and can withstand the sun, wind, and rain, as well as alternating hot and cold temperatures.
The environment near the swimming pool changes greatly, and it can also easily cope with it.
2.3). Strong and durable:
The shell of the outdoor dedicated display is strong and not afraid of bumps, which is suitable for places where people come and go, such as the swimming pool.
Moreover, the materials used are generally of good quality, not easy to break, and worry-free to use.
In short, the pantalla LED al aire libre with high waterproof grade is waterproof and moisture-proof, and durable.
It just solves the problems of humid environment near the swimming pool, strong sunlight, and easy bumps due to many people, and is especially suitable for use by the swimming pool.
3. Installation location and layout planning of the swimming pool LED display screen
1). Installation plan for the edge of the swimming pool
When installing a display screen by the swimming pool, safety is the most important.
The display screen must be installed higher, at least 1.5 meters from the ground, so that swimmers will not hit their heads, and it is convenient for everyone to see the screen.
The angle must also be exquisite, and the sunlight or light must not be reflected on the screen, making it difficult for people to see clearly.
In short, try more angles when installing to ensure that everyone can easily see the content on the screen without being dazzled by the reflection.
2). Fixing method of the wall around the swimming pool
If the display screen is installed on the wall by the swimming pool, you must pay attention to two things: load-bearing and waterproofing.
The wall must be strong enough to withstand the weight of the display screen.
If it is a concrete wall, expansion bolts will do; if it is a lightweight partition wall, it needs to be reinforced. Waterproofing is also critical.
The humidity near the swimming pool is high, and water vapor can easily penetrate into the display screen.
Therefore, when installing, use waterproof tape or sealant to seal the gap, so that the display screen can be used for a long time and will not be corroded by water vapor.
3). Suspended installation above the swimming pool
It looks cool to hang the display screen above the swimming pool, but it takes some time to install it.
First of all, a strong steel structure must be used to support the display screen. After all, it has to bear the weight of the display screen and withstand the wind.
When installing, the surroundings and the bottom must be sealed with waterproof sealing strips to prevent water droplets and water vapor from entering.
In addition, the wires and signal lines of the display screen must also be waterproof.
Otherwise, they can easily cause problems. In short, check several times during installation to ensure that every detail is in place.
4). Installation strategy for the swimming pool rest area
The main purpose of installing a display screen in the rest area of the swimming pool is to make the audience feel comfortable, and at the same time, pay attention to the heat dissipation of the equipment.
The height and angle of the LED display screen should be adjusted according to the seats in the rest area. The audience should not look up or down to watch, which is too tiring.
In addition, the display screen will heat up when it is running, so it should be installed in a well-ventilated place, or a small fan should be added inside, so that there will be no problems with the use of the equipment.
In short, when installing, you should consider the feelings of the audience so that they can enjoy the viewing experience comfortably.
4. The application value of the LED display screen in the swimming pool scene
If the swimming pool often holds competitions, then the LED display screen will be of great use.
It can display the results of the competition in real time, so that the audience can know who is leading and who is behind at first sight, and the atmosphere will be mobilized at once.
Moreover, the competition items can be arranged in advance, and the schedule can be displayed on the screen, so that everyone does not have to worry about missing the exciting items.
For example, the relay race is about to start, and the screen shows that the audience and athletes can prepare in advance, which is much more convenient than the traditional broadcast notification.
Safety is always the first priority. At the poolside, the LED display can push safety tips at any time, such as water depth warnings, reminding everyone not to venture into deep water areas.
If someone accidentally gets a cramp, the screen will immediately pop up a first aid guide to teach everyone how to save themselves or help others.
This information can save lives at critical moments, and the display can be played repeatedly so that everyone can remember it, which is much more useful than the safety slogans posted on the wall.
The operator of the swimming pool can also use the LED display to advertise.
For example, show your brand story and special services, or promote some preferential activities to attract more customers.
If there are sponsors, you can also advertise on the screen to increase revenue.
In this way, it not only increases the popularity of the venue but also allows customers to better understand this place and feel more intimate.
In addition to practical functions, LED displays can also bring entertainment to everyone.
For example, play underwater photography videos to let everyone see how wonderful the underwater world is, or play some fitness tutorials to teach everyone how to do warm-up exercises by the pool.
In this way, no matter how many people are waiting by the pool, they will not feel bored, but will feel that time is passing quickly.
This interactive experience not only increases everyone’s fun, but also attracts more people to the swimming pool, killing two birds with one stone.
5. Conclusión
Through the above analysis, we can see that installing an LED display screen by the swimming pool is not only feasible, but also brings many unexpected conveniences and value.
From event information display to safety tips, from brand promotion to interactive entertainment, a suitable LED display can greatly improve the operational efficiency and user experience of the swimming pool.
Finalmente, si quieres saber más sobre las pantallas LED, Por favor póngase en contacto con nosotros.
